Centrifugal defoaming mixer
Model: MJ-600H
Category: Electronic Production Manufacturing Equipment
Exhibitor: CGT TECHNOLOGY CO., LTD.
Booth No: M836
Characteristic
Uniformly mix, disperse and degas one or more raw materials.
5 major features:
1. Evenly dispersed and perfectly defoamed within five minutes (the maximum viscosity can be stirred up to 1 million cps).
2. The public and rotational speeds can be set freely, and the optimal operation mode can be set according to the material characteristics.
3. Two cups are stirred at the same time, doubling the production capacity.
4. Gear transmission with dual servo motors ensures stable speed and high yield reproducibility.
5. The blade-free contact design does not pollute the raw materials and improves the yield rate.
How it works:
The shear force generated by the rotation of the stirrer and the centrifugal force generated by the revolution, coupled with the vortex state and torque generated by the up and down convection, allow the material to be fully stirred and mixed in a very short time. When this kind of movement is carried out under vacuum, the volume of fine bubbles rapidly expands 760 times, and is removed at the interface in contact with the vacuum (133pa=1torr). Therefore, it only takes about 3 to 10 minutes to completely defoam and stir evenly. . (The actual time will vary slightly depending on the characteristics of each material, such as viscosity, mixing amount, etc.).
Application areas:
LED (A, B glue + phosphor), PCB printed circuit (green paint, solder paste), TP touch panel (silver paste, conductive paste), LCD panel (UV glue, liquid crystal), solar panel (silver paste, Silver aluminum glue), electronic parts (thermosetting packaging glue), automotive industry (sensing product materials), semiconductor packaging and testing (chip fixing silver glue), biotech medical (biological reagents, artificial joint materials)
Other Products
-
Vacuum Mixer
-
Large capacity syringe filling machine
-
Vacuum Degassing Machine Mixer_Full Series
-
Syringe filling machine/glue dispensing machine
-
Vacuum Syringe Centrifuge_Full Series
-
Defoaming mixer peripheral fixtures
-
Vacuum Syringe Centrifuge
-
Vacuum Mixer
-
Vacuum Degasser Mixer - Six Features
Products you may be interested in
-
Automated thin film thickness measure and analysis system
-
High Rigidity of Hydrostatic Cylindrical Plunge Grinding Machine
-
HDMI Signal Module
-
TGV Inspection Machine
-
Chemical Bottle Auto Cleaning Machine
-
Spatial Light modulator
-
R2R Hybrid Coater
-
Pressure Application
-
FPD TESTER
-
Check Weigher
-
Stainless Steel Cover Screws
-
Fujikura CT-101/102
-
Three-Temperature Separation Technology
-
Automatic Voltage Regulator(A.V.R
-
RVS series Liquid Ring Vacuum Pumps
-
Fujikura CT-115/116
-
OGP E7 Fully Automatic Measurement System
-
Heavy Duty of Hydrostatic Cylindrical Angular Grinding Machine
-
Plasma Surface Treatment Machine
-
Aluminum PCB
-
EGS JET PRINTER
-
ALD System
-
Fujikura 90S+ core alignment fusion splicer
-
MASS FLOW CONTROLLER
-
Semiconductor Dedicated of Hydrostatic Wafer Grinder
Highest Rated Products
-
Wafer Grinding Wheels for Silicon Carbide
-
igus linear system
-
chainflex® cables
-
Low-cost automation
-
e-chains system
-
Steering Mirror
-
Automated Motion Control
-
Focus tunable lenses
-
Imaging Modules
-
3D optical microprofilometer(white light interferometer)
-
Absolute Position Measurement System
-
SSA Single Axis Linear Motor Stage
-
Nano-positioning stage N2
-
E Series Servo Motor
-
DMT Series Ultra-thin Direct Drive Motor
-
VIDEO PATTERN GENERATOR
-
FPD TESTER
-
SMALL SIZE MEASURING PROBE
-
Liquid/Surge Tank Pulsation Dampeners
-
D200 D250 Series
-
YTS Pump Materials of Construction
-
D101 D152 series
-
D500 Series
-
Femtosecond Laser
-
Femtosecond Laser
-
Functional Water Production and Recycling Equipment
-
Single Wafer Wet Process Equipment
-
Batch Type Wet Station Bench
-
Wafer Support System (for TBDB)
-
Single Wafer Soak and Spary System